Typical cartridge filter systems are optimized for filter down to 20 microns.
Fiber Clear™, Fiber Start™ and Fiber Blend™ are the practical additions to any cartridge system, providing an extra fine layer of filtration and taking up where the cartridge material leaves off. Using Fiber Start and Fiber Blend will make your cartridges last longer and clean up easier, since they are the first line of defense against dirt and oils. Both Fiber Start and Fiber Blend will enhance your cartridge filtration system, giving your pool that clean, clear, polished look that only Fiber Clear products can provide.
Use Fiber Start at the Beginning of the Swimming Season for Start-Up and New Construction Clean-Up (To Address High Particulate Loading)
Fiber Start (for 10 micron filtration) is the perfect way to start your swimming season and to clear up high particulate loading pool conditions, as found in new construction cleanups and re-plastering jobs. Fiber Start, a 10 micron product, is an extremely effective filter aid and will extend filtration cycles during startups and clean-ups. After the pool has gone through a complete cycle or pressure exceeds 10 psi over clean filter pressure, clean the filter and recharge as needed. (Then polish with Fiber Clear for ultra fine filtration to 2 microns for the remainder of the season.) Fiber Start, like Fiber Clear and Fiber Blend, is biodegradable, non-toxic and protects the integrity of your cartridge filter. Your filter will clean up much more easily when using Fiber Start and Fiber Clear as your first line of defense.
Note: Fiber Start is optimized to clear our 10 micron particles, and it is not optimized to filter algae "spores." Use Fiber Clear or Fiber Blend to filter out those 4 micron algae spores instead. A symptom of cloudy pool water is caused by the residual spores that are left in the water after the algae is killed.
Now You Can Reduce Tile Scum with Fiber Blend, Powered by Cellulose Fiber and Natural Enzymes
Fiber Blend is a product that combines two micron particle filtration with a natural oil scavenging enzyme. By using Fiber Blend, you can continue to benefit from naturally effective filtration while also addressing the nasty tile scum lines that appear after heavy pool use. Fiber Blend attacks and breaks down the causes of tile scum – sun tan lotions, body oils, and cosmetic residue.
Perfect for commercial pools and other types of heavy use pool applications, Fiber Blend is a natural clarifier and an effective filter aid - reducing your pool's reliance on harsh chemical clarifiers and expensive enzymes. The enzyme stays in the water up to 15 days, gobbling up obnoxious oils.
Fiber Blend provides finer filtration than traditional media, is biodegradable and non-toxic, and adds all of the benefits of Fiber Clear.
Brochures
Top 10 Reasons To Switch From Diatomaceous Earth to Fiber Clear: CLICK HERE: Top 10 Reasons - D.E. To Fiber Clear
Top 10 Reasons To Use Fiber Clear As A Filter Aid In Your Sand Filtration System: CLICK HERE: Top 10 Reasons - Fiber Clear - Sand Filtration
Top 10 Reasons To Use Fiber Clear As A Filter Aid In Your Cartridge Filtration System: CLICK HERE: Top 10 Reasons - Fiber Clear - Cartridge Filtration
Use Fiber Start at the Beginning of the Swimming Season for Start-Up and New Construction Clean-Up (To Address High Particulate Loading)
Now You Can Reduce Tile Scum with Fiber Blend, Powered by Cellulose Fiber and Natural Enzymes